To access RJE Console, you must be assigned
the RJE Console user
access right.
The RJE module consists of four utilities, RJE Console, RJE Configuration Utility, and RJE Diagnostics. For information about opening and closing each utility, click the following links.
To access RJE Console, you must be assigned
the RJE Console user
access right.
To open or close the RJE Console, use one of the following methods.
On the Spool Window menu bar, select Tools | RJE Console.
On the menu bar, select File | Exit.
Click the Close
button ( 
) on the title bar.
Select Close from the control menu icon.
If a process is waiting to complete, a message displays on the console. When the process completes, the Status changes to Disconnected. To avoid waiting, on the menu bar, select Connections | Disconnect again. This forces the software to disconnect, even if processes are not complete. Before you use this option, make sure that unfinished processes will not be critical to production.
You must be a member of the local Administrators
group to operate the RJE Configuration Utility. If you are assigned the
Configure - RJE user
access right on the computer to which you are trying to connect, but
are not a member of the Administrators
group, the RJE Configuration Utility will operate in read-only mode.
To open or close the RJE Configuration utility, use one of the following methods.
On the Spool Window menu bar, select Tools | RJE Configuration.
On the RJE Console menu bar, select Tools | RJE Configuration. If the Console is connected, the current connection will open. If the Console is not connected, the local RJE Configuration utility will open.
Click the Close
button ( ) on the title bar.
Click OK twice to close and save your changes.
Click Cancel twice to close without saving your changes.
To open or close the RJE Diagnostics utility, use one of the following methods.
On the RJE
Console menu bar, select Tools | RJE
Diagnostics. If you are connected
to the host, the current connection will open. If you are not connected
to the host, the Select Connection
dialog box will display so that you can select a connection. 
On the menu bar, select File | Exit.
Click the Close
button ( ) on the title bar.
Select Close from the control menu icon.