Use this dialog box to configure your Barr SNA connection. You can access this dialog box when you add or modify an NJE connection from the Communications Profile tab. From the Connection Configuration dialog box, next to Barr SNA Configuration, click Modify to view this dialog box.
Click an option you want to learn more about.
Lists defined link services. Allows you to add, modify, or remove a link service.
Name
Displays the list of defined link services. Select a link service from the drop-down list or click Add to add a new link service.
Add button
Adds a new link service using the Select Link Service Type dialog box. Select the type of link service you want to add. Once your link type has been selected, another configuration dialog box displays where you can configure the selected link type. The available link type is HPR/IP (Enterprise Extender).
Modify button
Displays the Link tab for HPR/IP of the selected link for viewing or modification.
Remove button
Removes the selected link.
Displays the connection type for the selected link.
HPR/IP – The HPR/IP connection uses your network adapter to communicate with the mainframe over an IP network. Click Configure to open the HPR/IP Connection Configuration dialog box.
Configure button
Configures the connection using the HPR/IP Connection Configuration dialog box.
The NJE client needs the SNA logical unit (LU) name and number to contact and communicate with your host system. You can get this information from your host programmer.
Name
Enter the SNA LU name. The default is BAR1NJE2.
Number
Enter the LU number as a decimal. The default is 2.