Working with NJE profiles

A profile contains defined connections and a routing table. Use the following methods to maintain NJE profiles. The selected active profile is used when you start the NJE service.

You must be a member of the local Administrators group to operate the NJE Configuration Utility. If you are assigned the Configure - NJE user access right on the computer to which you are trying to connect, but are not a member of the Administrators group, the NJE Configuration Utility will operate in read-only mode.

• Define a profile

• Modify a profile

• Delete a profile

See also:

• Maintaining NJE connections

• Maintaining NJE routing tables

Defining a profile

1. Open the NJE Configuration Utility.

2. Select the Communications Profile tab.

   

3. Under Profile, click Add.

4. Enter a name for the new profile and click OK.

5. Use the Add and Remove buttons to add or remove active profile connections.

6. Use the Routing table drop-down list to select a routing table for the profile.

7. In the Active profile drop-down list, select which profile you want to use for your first NJE session, and then click OK.

Modifying a profile

1. Open the NJE Configuration Utility.

2. Select the Communications Profile tab.

   

3. In the Active profile drop-down list, select which profile you want to change.

4. Use the Add and Remove buttons to add or remove active profile connections.

5. Use the Routing table drop-down list to change the routing table for the profile.

6. In the Active profile drop-down list, choose which profile you want to use for your next NJE session, and then click OK.

Deleting a profile

1. Open the NJE Configuration Utility.

2. Select the Communications Profile tab.

3. In the Active profile drop-down list, select which profile you want to delete.

4. Click Remove.

5. In the Active profile drop-down list, select which profile you want to use for your next NJE session, and then click OK.