Contains information for identifying the owner or submitter associated with the data set. Treat information in this section as a token interpreted by the security component of the trusted computer base.
Has an identifier field of X’8C’ and a modifier field of X’00’. Can be built as part of a created NJE work element (job or SYSOUT) or added to a forwarded work element.
NDHTLENP - Length of prefix subsection
NDHTFLG0 - Owner flag
NDHTF0JB - NJE job owner
NDHTVERS - Security version
NDHTFLG1 - Flag byte
NDHT1EN - Encrypted
NDHT1EXT - Format
NDHTSTYP - Security type
NDHTFLG2 - Flag byte
NDHT2DFT - Not verified
NDHT2MLO - ML options active
NDHT2SHI - Could not verify
NDHT2TRS - Trusted user
NDHT2SUS - Surrogate user
NDHT2RMT - Job or data set remote origin
NDHTPOEX - Port entry class
NDHTSECL - Security label
NDHTCNOD - Security node
NDHTSUSR - User ID
NDHTSNOD - Job submission node
NDHTSGRP - Group ID
NDHTPOEN - Port of entry name
NDHTOUSR - Security owner user ID
NDHTOGRP - Security owner group ID
Prefix subsection's length. You cannot change the value for this field.
Length, type, and range: 2 binary (4-32764)
Default value: 4
Flag byte.
Length and type: 1 byte
Default value: 0
Contains this bit:
Indicates that the security section represents the owner of the NJE job. If not set indicates that the security section represents the submitter of the NJE job.
Type: bit 80
Default value: 0
Length of the security data subsection.
Length, type, and range: 1 binary (1-225)
Default value: X'01'
Flag byte.
Length and type: 1 byte
Default value: 0
Contains these bits:
Indicates that the security section (from NDHTSTYP on) is encrypted. The encryption algorithm is private to the security product.
Type: bit 80
Default value: 0
Indicates the format of the security section. B'1' indicates external format used exclusively in NJE.
Type: bit 40
Default value: 1
Security session Type and Range. A '7' indicates batch job Type and Range.
Length, type, and range: 1 binary (1-255)
Default value: X'07'
Flag byte.
Length and type: 1 byte
Contains these bits:
NDHT2DFT - Not verified
NDHT2MLO - ML options active
NDHT2SHI - Could not verify
NDHT2TRS - Trusted user
NDHT2SUS - Surrogate user
NDHT2RMT - Job or data set remote origin
Indicates security section data has not been verified by the security product at the node that created the security section. If not set, you can assume the security data was verified.
Type: bit 80
Default value: 1
Indicates required ML options were active at the node that created the security section.
Type: bit 20
Default value: 0
Indicates security data could not be verified at the node that created the security section.
Type: bit 10
Default value: 0
If set, the user to which this section applies is considered part of the trusted computer base.
Type: bit 8
Default value: 0
If set, the security data was obtained with a surrogate user at the creating node.
Type: bit 4
Default value: 0
Indicates the job or data set originated remotely.
Type: bit 2
Default value: 1
Indicates the port of entry class index, which is defined as follows:
1 = Terminal Class
2 = Console Class
3 = JESINPUT Class
Length, type, and range: 1 binary (1-255)
Default value: X'03'
Security label associated with the user represented by this section.
Length, type, and range: 8 character (A-Z, 0-9)
Default value: none
Node at which security section was generated.
Length, type, and range: 8 character (A-Z, 0-9)
Default value: none
Submitting user's ID.
Length, type, and range: 8 character (A-Z, 0-9)
Default value: none
Job submission node.
Length, type, and range: 8 character (A-Z, 0-9)
Default value: none
Submitting user's group ID.
Length, type, and range: 8 character (A-Z, 0-9)
Default value: none
Port of entry name at the creation node for the job creating this data set.
Length, type, and range: 8 character (A-Z, 0-9)
Default value: 0
Security session owner's user ID.
Length, type, and range: 8 character (A-Z, 0-9)
Default value: none
Security session owner's group ID.
Length, type, and range: 8 character (A-Z, 0-9)
Default value: blanks