Header Fields - Data set header POWER section

Output created at a VSE/POWER An S/390 operating systems program that simultaneously operates many readers, printers, and remote communications devices. node.

• NDHPFLG1 - Flag byte

• NDHPIDEV - POWER device type and range

• NDHPPRIO - Output priority

• NDHPDISP - Output disposition

• NDHPUSER - User information

• NDHPJBSF - Job suffix number

• NDHPSYID - System qualifier

• NDHPNSEP - Number of separator pages

• NDHPOPTN - COPYSEP parameter

• NDHPPART - Partition ID

• NDHPRCFM - Record format

• NDHGPRCSC - SCS print format

• NDHGPRCBM - BMS mapping format

• NDHGPRC32 - 3270 format

• NDHGPRCAP - APA (CPDS Acronym for Composed Page Data Stream. The carriage control typically used with AFP data stream records coming from an NJE host.) format

• NDHGPRCES - Escape mode format

• NDHGPRCAS - ASA control characters

• NDHGPRCMC - Machine control characters

• NDHPJNUM - Job number

• NDHPCOMP - Compaction The process of gathering and packing the currently allocated regions of memory or auxiliary storage into as small a space as possible, so as to create as much continuous free space as possible. table name

• NDHPPASS - Password

• NDHPSETP - Default SETPRT parameter list

• NDHPSTRT - Time of output spooling

NDHPFLG1

Reserved flag byte.

Length and type: 1 byte

NDHPIDEV

POWER device Type and Range.

Length and type: 1 binary

Default value: 0

NDHPPRIO

Selects the priority specified in the POWER generation.

Length and type: 1 character

Default value: none

NDHPDISP

These are valid values:

• D – delete after printing

• K – keep

• H – hold

• L – leave

Length and type: 1 character

Default value: D

NDHPUSER

Contains specified user information and is used for printing on a separator page.

Length and type: 16 character

Default value: blanks

NDHPJBSF

Job suffix number created for segmented output and is similar to the spin data set number.

Length and type: 1 binary

Default value: 0

NDHPSYID

System qualifier for a shared spool configuration and is used for printing on a separator page.

Length and type: 1 character

Default value: 0

NDHPNSEP

Number of separator pages to print for this output.

Length and type: 1 binary

Default value: 0

NDHPOPTN

COPYSEP parameter specified for the output.

Length and type: 1 bit

Default value: 0

NDHPPART

Identifies the partition where the job executed. Used to print on a separator page.

Length and type: 2 character

Default value: blank

NDHPRCFM

Record format.

Length and type: 1 binary

Default value: 0

Contains these bits:

• NDHGPRCSC - SCS print format

• NDHGPRCBM - BMS mapping format

• NDHGPRC32 - 3270 format

• NDHGPRCAP - APA (CPDS) format

• NDHGPRCES - Escape mode format

• NDHGPRCAS - ASA control characters

• NDHGPRCMC - Machine control characters

NDHGPRCSC (80 bit in NDHPRCFM)

SCS print format.

Type: bit 80

Default value: 0

NDHGPRCBM (40 bit in NDHPRCFM)

BMS mapping format.

Type: bit 40

Default value: 0

NDHGPRC32 (20 bit in NDHPRCFM)

3270 format.

Type: bit 20

Default value: 0

NDHGPRCAP (10 bit in NDHPRCFM)

APA (CPDS) format.

Type: bit 10

Default value: 0

NDHGPRCES (8 bit in NDHPRCFM)

Escape mode format.

Type: bit 8

Default value: 0

NDHGPRCAS (4 bit in NDHPRCFM)

ASA control characters.

Type: bit 4

Default value: 0

NDHGPRCMC (2 bit in NDHPRCFM)

Machine control characters.

Type: bit 2

Default value: 0

NDHPJNUM

Job number.

Length and type: 2 binary

Default value: 0

NDHPCOMP

Compaction table name used for output sent to RJE/SNA.

Length and type: 4 character

Default value: blank

NDHPPASS

Password specified for this output.

Length and type: 8 character

Default value: blank

NDHPSETP

Length and type: 68 character

Default value: blank

NDHPSTRT

Time (in STCK format) output spooling started.

Length and type: 8 character

Default value: blanks