Complete the following steps to configure the NJE CTC device.
Install
the CHANNEL-IN hardware and device driver.
If you are using a Bus & Tag connection, you will install
the CHANNEL-IN (BT) adapter, Channel Attach Box, and cables. For CHANNEL
INTELLIGENCE, you will install the CHANNEL INTELLIGENCE adapter and cable.
If you are using an ESCON connection, you will install the CHANNEL-IN
(ES) adapter, ESCON coupler (if needed), and fiber-optic
cable A form of cable used in networks that transmits
signals optically, rather than electrically as do coaxial and twisted-pair
cable.
Run
hardware diagnostics to verify that you correctly installed the hardware.
If you are using a Bus & Tag connection, you will install
the CHANNEL-IN (BT) adapter, Channel Attach Box, and cables. For CHANNEL
INTELLIGENCE, you will install the CHANNEL INTELLIGENCE adapter and cable.
If you are using an ESCON connection, you will install the CHANNEL-IN
(ES) adapter, ESCON coupler (if needed), and fiber-optic
cable A form of cable used in networks that transmits
signals optically, rather than electrically as do coaxial and twisted-pair
cable.